home *** CD-ROM | disk | FTP | other *** search
- Path: erinews.ericsson.se!usenet
- From: etxzayl@cate1.ericsson.se (Johan Zeylon IN/SA/BIB)
- Newsgroups: comp.sys.amiga.hardware
- Subject: Re: A3000: 32-bit mem appears to be 24-bit?
- Date: 5 Feb 1996 17:33:14 GMT
- Organization: Ericsson Telecom AB
- Message-ID: <4f5f0q$404@erinews.ericsson.se>
- References: <4em5jb$8es@hobbes.compusult.nf.ca>
- Reply-To: etxzayl@cate1.ericsson.se
- NNTP-Posting-Host: dill.ericsson.se
-
- In article 8es@hobbes.compusult.nf.ca, mworden@public.compusult.nf.ca (Mark Worden) writes:
- >I have an A3000/030/25mhz. It has 2 megs chip RAM, on the motherboard
- >there's another 4 megs fast RAM, and there's a SupraRAM card fully
- >populated with 8 megs RAM.
- >
- >Anyway, I fired up SysInfo v3.15, and it lists the following concerning
- >the RAM:
- >
- > 1) For the 2 megs chip RAM, "LOCAL PUBLIC 24BitDMA"
- > 2) For the 4 megs fast RAM on the motherboard, "32BitRAM LOCAL PUBLIC"
- > 3) For the SupraRAM 8 megs, "FAST RAM PUBLIC 24BitDMA"
- >
- >What does the "...PUBLIC 24BitDMA" mean? Is the memory not 32-bit, or is
- >there something I'm missing? The chip RAM is 32-bit, so why isn't the
- >others? Actually, I expected to find that the SupraRAM was only 16-bit,
- >since I thought I heard about it being only 16-bit.
- >
- >If anyone can share some insight on this, I'd really appreciate it.
- >
-
- Easy!
- 24BitDMA means that the RAM can be accessed with the Amiga native DMA.
- The original Amiga had a 68000 processor with 24 address lines. Therefore
- the custom chips were designed with 24 address lines too. They can only
- access the first 16Mb of memory space. Including CHIP RAM, ZorroII
- expansions (up to 8Mb), motherboard RAM (in 68000 based Amigas) and
- custom chip registers.
- The motherboard RAM of the 3000 is located above 16Mb and therefore needs
- more address lines to be accessed. Likewise ZorroIII expansions can not
- be accessed by the custom chips.
-
- /Johan
-
-
-
-